Aurumcoin_AU NODE/Wallet Image for Raspberry PI with "PIXEL" surface on Core 0.8.6.1

How to around the Aurumcoin-AU
Post Reply
User avatar
Althor49
Posts: 3
Joined: Sat Jan 14, 2017 4:15 pm
Location: Germany
Contact:

Aurumcoin_AU NODE/Wallet Image for Raspberry PI with "PIXEL" surface on Core 0.8.6.1

Post by Althor49 » Fri Jun 16, 2017 8:48 pm

Image Image Image


Raspbian Image for Aurumcoin-AU NODE/WALLET with "PIXEL" surface
-based on "2017-04-10-raspbian-jessie-lite.img"


Download: Aurumcoin_AU_PIXEL-0.8.6.1.rar

Requirements: Raspberry PI, 4GB SD Card

Configuration:
-PIXEL Desktop
-no Apache
-ipv6 disabled
-remote Desktop installed
-ssh enabled
-ssh root login enabled (pw: raspberry)
-htop installed


write the image with something like "Win32DiskImager" to your SD Card and start the Raspberry

if you change your pc to IP 192.168.100.xxx (or add), you can login over SSH or remote Desktop to user pi and root (use pi)
else you have to use a monitor and keyboard (mouse not neccessary)

log in with:
Username: pi
Password: aurum

we make some configuration (passwords we change later):

-> Raspberry(Start) -> System Tools -> change static IP

Change this lines to your network

Code: Select all

interface eth0

static ip_address=192.168.100.205/24
static routers=192.168.100.1
static domain_name_servers=192.168.100.1

interface wlan0

static ip_address=192.168.100.206/24
static routers=192.168.100.1
static domain_name_servers=192.168.100.1
make a restart (you need pi password -> aurum)

-> Raspberry(Start) -> System Tools -> raspi-config

(currently locale setting is en_GB UTF-8 / Keyboard = 105 key en_GB)
4 Localisation Options -> I1 Change Locale ->
Try to use a UTF-8 locale setting!
on login with keyboard and monitor you can change the Keyboard layout

7 Advanced Options -> A1 Expand Filesystem

8 Update

make a restart (you need pi password -> aurum)

Open LXTerminal
-> Raspberry(Start) -> Accessories -> LXTerminal

change password for pi (current: aurum)

Code: Select all

passwd pi
change password for root (current: raspberry)

Code: Select all

sudo passwd root

now you can activate a "ifdown" cronjob for user pi for Aurumcoin_AU NODE
open LXTerminal
-> Raspberry(Start) -> Accessories -> LXTerminal

Code: Select all

crontab -e
remove "#" from line:

Code: Select all

#*/20 * * * * /home/aucoins/./start_au.sh startifdown
Type "STRG+X" now "y" now "Return" to save changes
now the system check every 20min if aurum NODE/WALLET is running and start again if stopped
(.log see -> /home/pi/aurumcoin_au/logs/aucoins.log)
open the port 11080 to your raspberry IP only!! to have a full NODE on your Gateway/Rooter.

For Mining with CGminer (Version 4.10.0)
configured with --enable-bitmain --enable-icarus

Open CGminer config
-> Raspberry(Start) -> CGminer -> CGminer.config
change you need (currently configured for mining AU to www.debutech.de Pool with my address)

Thats it - have fun.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest